bgp:BmpSvr
BMP server configuration
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| addr | address:Ip |
IP address of the BMP server | Value must match ipv4 or ipv6 known format |
| adminSt | bgp:BmpSt (scalar:Enum8) |
BMP server config state | SELECTION: 0 - enabled 1 - disabled DEFAULT: enabled |
| delayIntvl | scalar:Uint16 |
Initial connect delay | RANGE: [30 , 720] DEFAULT: 45 |
| descr | string:Basic |
BMP server description string | A sequence of characters |
| id | bgp:SrvId (scalar:UByte) |
BMP Server Id | RANGE: [1 , 2] |
| port | scalar:Uint16 |
Port number of the BMP server | RANGE: [0 , 65535] |
| refreshIntvlDelay | scalar:Uint16 |
Route refresh trigger delay | RANGE: [30 , 720] DEFAULT: 30 |
| refreshIntvlSkip | scalar:Bool |
Route refresh trigger skip | SELECTION: true or false DEFAULT: false |
| srcIf | nw:IfId (base:IfIndex) |
Source Interface for BMP server | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| statIntvl | scalar:Uint16 |
Statistics reporting interval | RANGE: [0 , 720] |
| vrfName | l3:VrfName (string:Basic) |
VRF for BMP server | A sequence of characters DEFAULT: default |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |